• GoldED Spellcheck

    From Kevin Miller@1:267/585 to All on Sat Feb 20 12:21:27 2021
    Greets All,

    Thx to everyone who has helped me get over the hump of setting up GoldED. It has been a tremendous help!

    I'm just about finished with this configuration for the exception of the spellcheck function.

    What are my options or any recommendations I should attempt?

    Thx,

    -km

    .:. Rust Belt BBS - [rbbbs.mtonetwork.com][https://www.mtonetwork.com]

    ... I don't get drunk... I get awesome and invincible!
    --- GoldED+/W32-MSVC 1.1.5-b20180707
    * Origin: Rust Belt BBS, Rochester, NY (Home of the Garbage Plate) (1:267/585)
  • From Alan Ianson@1:153/757.2 to Kevin Miller on Sat Feb 20 10:00:25 2021
    Re: GoldED Spellcheck
    By: Kevin Miller to All on Sat Feb 20 2021 12:21 pm

    I'm just about finished with this configuration for the exception of the spellcheck function.

    What are my options or any recommendations I should attempt?

    MSSPELL and MYSPELL. I use hunspell on linux, it is compatible with myspell dictionaries.

    I use these keywords, there are more listed in the advanced.cfg.

    SCheckerEnabled Auto
    SCheckerDefLanf en_US
    SCheckerDicPath /usr/share/hunspell

    Ttyl :-),
    Al

    ... You! What PLANET is this? McCoy, stardate 3134.0.
    --- SBBSecho 3.13-Linux
    * Origin: The Rusty MailBox - Penticton, BC Canada (1:153/757.2)
  • From Alan Ianson@1:153/757.2 to Kevin Miller on Sat Feb 20 10:01:50 2021
    Re: GoldED Spellcheck
    By: Alan Ianson to Kevin Miller on Sat Feb 20 2021 10:00 am

    SCheckerDefLanf en_US

    That should be SCheckerDefLang en_US.

    Ttyl :-),
    Al

    ... Proofread carefully to see if you any words out
    --- SBBSecho 3.13-Linux
    * Origin: The Rusty MailBox - Penticton, BC Canada (1:153/757.2)
  • From Vincent Coen@2:250/1 to Kevin Miller on Sat Feb 20 18:06:21 2021
    Hello Kevin!

    Saturday February 20 2021 12:21, you wrote to All:

    Greets All,

    Thx to everyone who has helped me get over the hump of setting up
    GoldED. It has been a tremendous help!

    I'm just about finished with this configuration for the exception of
    the spellcheck function.

    What are my options or any recommendations I should attempt?

    Thx,

    Must admit over the years I have tried a few times to get it to work but without any success and that was just using English.



    Vincent

    --- Mageia Linux v7.1 X64/Mbse v1.0.7.21/GoldED+/LNX 1.1.5-b20180707
    * Origin: Air Applewood, The Linux Gateway to the UK & Eire (2:250/1)
  • From Alan Ianson@1:153/757 to Vincent Coen on Sun Feb 21 06:55:00 2021
    Hello Vincent,

    Must admit over the years I have tried a few times to get it to work
    but without any success and that was just using English.

    I just recently did this. I have hunspell installed so it was as easy as adding the three keywords I mentioned to Mike and pointing the SCheckerDicPath at my hunspell dictionaries.

    On my slackware box both /usr/share/hunspell and /usr/share/myspell/dicts work.

    Ttyl :-),
    Al

    --- GoldED+/LNX 1.1.5-b20180707
    * Origin: The Rusty MailBox - Penticton, BC Canada (1:153/757)
  • From Vincent Coen@2:250/1 to Alan Ianson on Sun Feb 21 16:50:34 2021
    Hello Alan!

    Sunday February 21 2021 06:55, you wrote to me:

    Hello Vincent,

    Must admit over the years I have tried a few times to get it to
    work but without any success and that was just using English.

    I just recently did this. I have hunspell installed so it was as easy
    as adding the three keywords I mentioned to Mike and pointing the SCheckerDicPath at my hunspell dictionaries.

    On my slackware box both /usr/share/hunspell and
    /usr/share/myspell/dicts work.

    With Mageia v7 I noticed that starting golded with the checker set in configs it stops until I hit retuen but I cannot see what is the key/s to tell it to do
    a spell check !

    Please advise,


    Vincent

    --- Mageia Linux v7.1 X64/Mbse v1.0.7.21/GoldED+/LNX 1.1.5-b20180707
    * Origin: Air Applewood, The Linux Gateway to the UK & Eire (2:250/1)
  • From Alan Ianson@1:153/757 to Vincent Coen on Sun Feb 21 10:17:56 2021
    Hello Vincent,

    On my slackware box both /usr/share/hunspell and
    /usr/share/myspell/dicts work.

    With Mageia v7 I noticed that starting golded with the checker set in configs it stops until I hit retuen but I cannot see what is the key/s
    to tell it to do a spell check !

    Hmm.. my golded starts up in the message area list. There is no key to do a spell check. Your spelling is checked as you type. Misspelled words show up as white and other words show up as normal. LGrey in my case.

    I would check the directory you have set for SCheckerDicPath, my /usr/share/hunspell directory has these files amoung others..

    === Cut ===
    en_AU.aff
    en_AU.dic
    en_CA.aff
    en_CA.dic
    en_GB-ise.aff
    en_GB-ise.dic
    en_GB-ize.aff
    en_GB-ize.dic
    en_GB.aff@
    en_GB.dic@
    en_US.aff
    en_US.dic
    === Cut ===

    Also check that your SCheckerDefLang is set to one of the above, I suspect en_GB in your case.

    Ttyl :-),
    Al

    --- GoldED+/LNX 1.1.5-b20180707
    * Origin: The Rusty MailBox - Penticton, BC Canada (1:153/757)
  • From Vincent Coen@2:250/1 to Alan Ianson on Mon Feb 22 16:09:48 2021
    Hello Alan!

    Sunday February 21 2021 10:17, you wrote to me:

    Hello Vincent,

    On my slackware box both /usr/share/hunspell and
    /usr/share/myspell/dicts work.

    With Mageia v7 I noticed that starting golded with the checker
    set in configs it stops until I hit retuen but I cannot see what
    is the key/s to tell it to do a spell check !

    Hmm.. my golded starts up in the message area list. There is no key to
    do a spell check. Your spelling is checked as you type. Misspelled
    words show up as white and other words show up as normal. LGrey in my
    case.

    I would check the directory you have set for SCheckerDicPath, my /usr/share/hunspell directory has these files amoung others..

    === Cut ===
    en_AU.aff
    en_AU.dic
    en_CA.aff
    en_CA.dic
    en_GB-ise.aff
    en_GB-ise.dic
    en_GB-ize.aff
    en_GB-ize.dic
    en_GB.aff@
    en_GB.dic@
    en_US.aff
    en_US.dic
    === Cut ===

    Also check that your SCheckerDefLang is set to one of the above, I
    suspect en_GB in your case.

    I have now reset the following :

    ;EDITSPELLCHECK /usr/bin/hunspell @file
    SCheckerEnabled Auto
    SCheckerDefLang en_GB
    SCheckerDictPath "/usr/share/hunspell"
    Error Lred on Black
    HIGHLIGHTUNREAD Yes


    Have not set the top line as not sure it is right other than the path is correct for hunspell

    Needless to say it still stops after loading waiting for keyboard entry before going to the echo list area.


    Vincent

    --- Mageia Linux v7.1 X64/Mbse v1.0.7.21/GoldED+/LNX 1.1.5-b20180707
    * Origin: Air Applewood, The Linux Gateway to the UK & Eire (2:250/1)
  • From Alan Ianson@1:153/757 to Vincent Coen on Mon Feb 22 09:28:12 2021
    Hello Vincent,

    SCheckerEnabled Auto
    SCheckerDefLang en_GB
    SCheckerDictPath "/usr/share/hunspell"
    ^
    Try SCheckerDicPath /usr/share/hunspell

    Error Lred on Black
    HIGHLIGHTUNREAD Yes

    I don't have these in my config, but they may work.

    Have not set the top line as not sure it is right other than the path
    is correct for hunspell

    ;EDITSPELLCHECK /usr/bin/hunspell @file

    I don't have that in my config and I'm not sure how it is used.

    Needless to say it still stops after loading waiting for keyboard
    entry before going to the echo list area.

    I'm not sure why that is.

    Ttyl :-),
    Al

    --- GoldED+/LNX 1.1.5-b20180707
    * Origin: The Rusty MailBox - Penticton, BC Canada (1:153/757)
  • From Vladimir Fyodorov@2:6035/3.1 to Kevin Miller on Mon Feb 22 21:21:46 2021
    Hello, Kevin!

    Thx to everyone who has helped me get over the hump of setting up
    GoldED. It has been a tremendous help!

    I'm just about finished with this configuration for the exception of
    the spellcheck function.

    What are my options or any recommendations I should attempt?

    I wrote instructions for Russian-speaking users, sorry if the translation is bad.

    = RU.GOLGED (2:6035/3.1) =====================================================
    Msg : 857 of 1782 Loc
    From : Vladimir Fyodorov 2:6035/3.1 19 20 10:20
    To : Mart Kuvshinov
    Subj : Re: Everything is in Russian here =============================================================================== Everything is in Russian here

    Everything is in Russian here

    ===
    Golded shouldn't be too old. For example, in the 2007 versions, the check spelling doesn't work yet. I also didn't check GoldEd-NSF, so I recommend updating it and replacing it with the normal GoldEd+ from the main branch: https://github.com/golded-plus
    As a bonus, you will get the fact that many hotkeys for Linux/mac are fixed there.

    Next, you need the MySpell dictionaries. Semyon Panevin has a lot of them: http://ftp.velo36.ru/pub/freq/myspell.tgz

    Unpack them and put them, for example, in the DICT folder in the golded directory. The rest
    depends on which of the dictionaries you need (you can connect several). dictionaries at the same time). I have connected a Russian dictionary with an "e" and American
    English. To do this, I wrote in the config:
    SCheckerEnabled Auto
    SCheckerDefLang ru_RU_yo en_US
    SCheckerDicPath \fido\golded\dict\

    Replace the path in the last directive with your own.

    For languages other than English, you need to connect the corresponding transcoding tables. For Russian, you need two files:
    866_koi.chs
    koi_866.chs
    You can download it from me: https://yadi.sk/d/yXG6_bvkHQTxz
    Put them, for example, in the XLAT folder in the golded directory and write them in the config:

    XLATPATH \fido\GOLDED\XLAT\ ; fix it on your way
    XLATCHARSET KOI8-R CP866 koi_866.chs
    XLATCHARSET CP866 KOI8-R 866_koi.chs

    It remains to determine the color that will highlight the errors. I have it spelled
    out in gedcolor. cfg:
    COLOR SCHECKER Error LRed on Black ;the color of the selection of the wrong word

    If you don't have a separate gedcolor.cfg file, then you can add this directive to the main or any other connected golded config.

    The main drawback is that all words with a hyphen are considered incorrect. Second - there is no
    way to work with a custom dictionary (although you can manually edit dictionaries).
    ===

    Sincerely yours, Vladimir Fyodorov, esquire.
    ... Necessity is the mother of invention
    --- GoldED+/W64-MSVC 1.1.5-b20170303
    * Origin: Esquire Station (2:6035/3.1)
  • From Vincent Coen@2:250/1 to Alan Ianson on Mon Feb 22 22:07:10 2021
    Hello Alan!

    Monday February 22 2021 09:28, you wrote to me:

    Hello Vincent,

    SCheckerEnabled Auto
    SCheckerDefLang en_GB
    SCheckerDictPath "/usr/share/hunspell"
    ^
    Try SCheckerDicPath /usr/share/hunspell

    Changed that and it now loads to the echo lists.

    Error Lred on Black
    HIGHLIGHTUNREAD Yes


    I don't have these in my config, but they may work.

    Left off for now

    Have not set the top line as not sure it is right other than the
    path is correct for hunspell

    ;EDITSPELLCHECK /usr/bin/hunspell @file

    I don't have that in my config and I'm not sure how it is used.

    Needless to say it still stops after loading waiting for keyboard
    entry before going to the echo list area.

    I'm not sure why that is.

    Ttyl :-),
    Al

    Next is to mistype some words and see what happens and with my eye sight that is easy next will be to see why backspace move forwards one char and leaves a '.'.


    Vincent

    --- Mageia Linux v7.1 X64/Mbse v1.0.7.21/GoldED+/LNX 1.1.5-b20180707
    * Origin: Air Applewood, The Linux Gateway to the UK & Eire (2:250/1)
  • From Vincent Coen@2:250/1 to Alan Ianson on Thu Feb 25 22:49:33 2021
    Hello Alan!

    Monday February 22 2021 09:28, you wrote to me:

    Hello Vincent,

    SCheckerEnabled Auto
    SCheckerDefLang en_GB
    SCheckerDictPath "/usr/share/hunspell"
    ^
    Try SCheckerDicPath /usr/share/hunspell

    Error Lred on Black
    HIGHLIGHTUNREAD Yes

    I don't have these in my config, but they may work.

    Have not set the top line as not sure it is right other than the
    path is correct for hunspell

    ;EDITSPELLCHECK /usr/bin/hunspell @file

    I don't have that in my config and I'm not sure how it is used.

    Needless to say it still stops after loading waiting for keyboard
    entry before going to the echo list area.

    I'm not sure why that is.

    Seems it is working well it changes the word typed if in error but does not seem to show possible correct word unless there is a special key to
    highlight / show it ?


    Vincent

    --- Mageia Linux v7.1 X64/Mbse v1.0.7.21/GoldED+/LNX 1.1.5-b20180707
    * Origin: Air Applewood, The Linux Gateway to the UK & Eire (2:250/1)
  • From Alan Ianson@1:153/757 to Vincent Coen on Fri Feb 26 00:47:50 2021
    Hello Vincent,

    Seems it is working well it changes the word typed if in error but
    does not seem to show possible correct word unless there is a special
    key to highlight / show it ?

    I don't think it shows possible spellings.

    ;EDITSPELLCHECK /usr/bin/hunspell @file

    Using this method might work differently but I have never tried it.

    Ttyl :-),
    Al

    --- GoldED+/LNX 1.1.5-b20180707
    * Origin: The Rusty MailBox - Penticton, BC Canada (1:153/757)
  • From Richard Menedetter@2:310/31 to Vincent Coen on Fri Feb 26 16:45:24 2021
    Hi Vincent!

    25 Feb 2021 22:49, from Vincent Coen -> Alan Ianson:

    Seems it is working well it changes the word typed if in error but
    does not seem to show possible correct word unless there is a special
    key to highlight / show it ?

    AltS
    @S EDITSCheckerMenu

    CU, Ricsi

    ... We have multiplied our possessions, but reduced our values.
    --- GoldED+/LNX
    * Origin: About as useful as an Ashtray on a Motorbike! (2:310/31)
  • From Richard Menedetter@2:310/31 to Alan Ianson on Fri Feb 26 16:44:22 2021
    Hi Alan!

    26 Feb 2021 00:47, from Alan Ianson -> Vincent Coen:

    Seems it is working well it changes the word typed if in error
    but does not seem to show possible correct word unless there is a
    special key to highlight / show it ?
    I don't think it shows possible spellings.

    Sure it does!
    AltS

    There you can also change tha language.

    CU, Ricsi

    ... The grass next door may be greener. But, it's just as hard to weed.
    --- GoldED+/LNX
    * Origin: Twisted mind? No just bent in several strategic places! (2:310/31)
  • From Alan Ianson@1:153/757 to Richard Menedetter on Fri Feb 26 08:37:22 2021
    Hello Richard,

    Seems it is working well it changes the word typed if in error
    but does not seem to show possible correct word unless there is
    a special key to highlight / show it ?
    I don't think it shows possible spellings.

    Sure it does!
    AltS

    There you can also change tha language.

    That sounds great. In my setup AltS brings up the save message menu with no options for spell checking.

    Can you show me your spell check keywords used in your config?

    Ttyl :-),
    Al

    --- GoldED+/LNX 1.1.5-b20180707
    * Origin: The Rusty MailBox - Penticton, BC Canada (1:153/757)
  • From Vincent Coen@2:250/1 to Richard Menedetter on Fri Feb 26 17:12:21 2021
    Hello Richard!

    Friday February 26 2021 16:44, you wrote to Alan Ianson:

    Hi Alan!

    26 Feb 2021 00:47, from Alan Ianson -> Vincent Coen:

    Seems it is working well it changes the word typed if in error
    but does not seem to show possible correct word unless there is
    a special key to highlight / show it ?
    I don't think it shows possible spellings.

    Sure it does!
    AltS

    There you can also change tha language.


    If you mean Alt/S I am getting the save messege or mark it etc nothing about spell checking etc.


    Vincent

    --- Mageia Linux v7.1 X64/Mbse v1.0.7.21/GoldED+/LNX 1.1.5-b20180707
    * Origin: Air Applewood, The Linux Gateway to the UK & Eire (2:250/1)
  • From Richard Menedetter@2:310/31 to Alan Ianson on Sat Feb 27 00:38:40 2021
    Hi Alan!

    26 Feb 2021 08:37, from Alan Ianson -> Richard Menedetter:

    I don't think it shows possible spellings.
    Sure it does!
    AltS
    That sounds great. In my setup AltS brings up the save message menu
    with no options for spell checking.

    Can you show me your spell check keywords used in your config?

    @S EDITSCheckerMenu

    CU, Ricsi

    ... Happiness isn't something you experience. It's something you remember.
    --- GoldED+/LNX
    * Origin: Never tell them what you wouldn't want to do. (2:310/31)
  • From Richard Menedetter@2:310/31 to Vincent Coen on Sat Feb 27 00:39:06 2021
    Hi Vincent!

    26 Feb 2021 17:12, from Vincent Coen -> Richard Menedetter:

    I don't think it shows possible spellings.
    Sure it does!
    AltS
    If you mean Alt/S I am getting the save messege or mark it etc nothing about spell checking etc.

    Seems I changed the default:
    @S EDITSCheckerMenu

    CU, Ricsi

    ... Charm will get you by for 15 minutes, then you gotta know your stuff.
    --- GoldED+/LNX
    * Origin: Friendships are not always preserved in alcohol. (2:310/31)
  • From Alan Ianson@1:153/757 to Vincent Coen on Fri Feb 26 21:28:16 2021
    Hello Vincent,

    If you mean Alt/S I am getting the save messege or mark it etc nothing about spell checking etc.

    Try F9 from the editor.

    Ttyl :-),
    Al

    --- GoldED+/LNX 1.1.5-b20180707
    * Origin: The Rusty MailBox - Penticton, BC Canada (1:153/757)
  • From Vincent Coen@2:250/1 to Richard Menedetter on Sat Feb 27 15:53:05 2021
    Hello Richard!

    Saturday February 27 2021 00:39, you wrote to me:

    Hi Vincent!

    26 Feb 2021 17:12, from Vincent Coen -> Richard Menedetter:

    I don't think it shows possible spellings.
    Sure it does!
    AltS
    If you mean Alt/S I am getting the save messege or mark it etc
    nothing about spell checking etc.

    Seems I changed the default:
    @S EDITSCheckerMenu

    Put that in but made no change other than Golded pauses waiting for return so guess it does not like that line.

    Looking in golded.log it shows :

    ---------- Sat 27 Feb 21, GoldED+/LNX 1.1.5-b20180707 (Sep 16 2019 19:01:51)
    ! 15:52:38 Test error exit at [gedoss.cpp,224].
    ! 15:52:38 ShellToDos(): command is empty, message is: "SpellChecker: "
    ! 15:52:39 Test error exit at [gedoss.cpp,224].
    ! 15:52:39 ShellToDos(): command is empty, message is: "SpellChecker: "


    If it helps :)

    Vincent

    --- Mageia Linux v7.1 X64/Mbse v1.0.7.21/GoldED+/LNX 1.1.5-b20180707
    * Origin: Air Applewood, The Linux Gateway to the UK & Eire (2:250/1)
  • From Vincent Coen@2:250/1 to Alan Ianson on Sat Feb 27 15:55:53 2021
    Hello Alan!

    Friday February 26 2021 21:28, you wrote to me:

    Hello Vincent,

    If you mean Alt/S I am getting the save messege or mark it etc
    nothing about spell checking etc.

    Try F9 from the editor.

    Does nothing

    Other than (if cursor is in bad word moving cursor to begining of line (i.e., 'begining' .


    Vincent

    --- Mageia Linux v7.1 X64/Mbse v1.0.7.21/GoldED+/LNX 1.1.5-b20180707
    * Origin: Air Applewood, The Linux Gateway to the UK & Eire (2:250/1)
  • From Alan Ianson@1:153/757 to Vincent Coen on Sat Feb 27 08:53:56 2021
    Hello Vincent,

    Try F9 from the editor.

    Does nothing

    In my case it brings up a list of possible spellings to choose from.

    Other than (if cursor is in bad word moving cursor to begining of line (i.e., 'begining' .

    I don't have a goldkeys.cfg but I see..

    F9 EDITspellcheck

    in the example goldkeys.cfg. If you have a goldkeys.cfg you may need to adjust it.

    Ttyl :-),
    Al

    --- GoldED+/LNX 1.1.5-b20180707
    * Origin: The Rusty MailBox - Penticton, BC Canada (1:153/757)
  • From Kai Richter@2:240/77 to Vincent Coen on Sat Feb 27 22:13:48 2021
    Hello Vincent!

    27 Feb 21, Vincent Coen wrote to Richard Menedetter:

    Seems I changed the default:
    @S EDITSCheckerMenu

    Put that in but made no change other than Golded pauses waiting for
    return so guess it does not like that line.

    ShellToDos(): command is empty, message is: "SpellChecker: " !

    Looks like it tries to load another command. Sometimes the sequence of the keywords is important. Maybe you could create a minimum config file and use that for testing with golded -C <configfile>. And sometimes golded -FF does the trick.

    Regards

    Kai

    --- GoldED+/LNX 1.1.4.7
    * Origin: Monobox (2:240/77)
  • From Vincent Coen@2:250/1 to Alan Ianson on Sat Feb 27 23:03:09 2021
    Hello Alan!

    Saturday February 27 2021 08:53, you wrote to me:

    Hello Vincent,

    Try F9 from the editor.

    Does nothing

    In my case it brings up a list of possible spellings to choose from.

    Other than (if cursor is in bad word moving cursor to begining of
    line (i.e., 'begining' .

    I don't have a goldkeys.cfg but I see..

    F9 EDITspellcheck

    in the example goldkeys.cfg. If you have a goldkeys.cfg you may need
    to adjust it.

    Just added F9 ... etc but golded stops on it abnd goldkeys doesnot have that one but has :

    ^F5 EDITdelltword
    ^T EDITdelrtword
    ^F6 EDITdelrtword

    Which I am assuming the last one means Cntl/F6

    but that does nothing.

    Bye the bye my golded shows version at the bottom of right screen as ^Golded+/LNX 1.1.5

    Vincent

    --- Mageia Linux v7.1 X64/Mbse v1.0.7.21/GoldED+/LNX 1.1.5-b20180707
    * Origin: Air Applewood, The Linux Gateway to the UK & Eire (2:250/1)
  • From Alan Ianson@1:153/757 to Vincent Coen on Sat Feb 27 21:08:20 2021
    Hello Vincent,

    Just added F9 ... etc but golded stops on it abnd goldkeys doesnot
    have that one but has :

    ^F5 EDITdelltword
    ^T EDITdelrtword
    ^F6 EDITdelrtword

    Try adding..

    F9 EDITspellcheck

    to your goldkeys.cfg. Don't put it in golded.cfg, it won't work.

    Bye the bye my golded shows version at the bottom of right screen as ^Golded+/LNX 1.1.5

    Yes, your golded+ is up to date.

    Ttyl :-),
    Al

    --- GoldED+/LNX 1.1.5-b20180707
    * Origin: The Rusty MailBox - Penticton, BC Canada (1:153/757)
  • From Richard Menedetter@2:310/31 to Vincent Coen on Sun Feb 28 09:54:16 2021
    Hi Vincent!

    27 Feb 2021 15:53, from Vincent Coen -> Richard Menedetter:

    @S EDITSCheckerMenu
    Put that in but made no change other than Golded pauses waiting for
    return so guess it does not like that line.

    Do you have the other options set discussed previously?

    SCheckerEnabled Auto
    SCheckerDefLang en_US de_AT
    SCheckerDicPath "/usr/local/etc/golded+/dict"

    And naturally the dictionary files in the DicPath directory.

    CU, Ricsi

    ... We change not from seeing the light; but feeling the heat.
    --- GoldED+/LNX
    * Origin: Constant change is here to stay. (2:310/31)
  • From Vincent Coen@2:250/1 to Alan Ianson on Wed Mar 3 17:20:25 2021
    Hello Alan!

    Saturday February 27 2021 21:08, you wrote to me:

    Hello Vincent,

    Just added F9 ... etc but golded stops on it abnd goldkeys
    doesnot have that one but has :

    ^F5 EDITdelltword
    ^T EDITdelrtword
    ^F6 EDITdelrtword

    Try adding..

    F9 EDITspellcheck

    to your goldkeys.cfg. Don't put it in golded.cfg, it won't work.

    Now moved to goldkeys.cfg

    Done that but F9 does not seem to do a lot just move the cursor back to beginning of the line that only hold one word miss-typed.

    I give up:(

    Bye the bye my golded shows version at the bottom of right screen
    as ^Golded+/LNX 1.1.5

    Yes, your golded+ is up to date.

    Thanks good to know.



    Vincent

    --- Mageia Linux v7.1 X64/Mbse v1.0.7.21/GoldED+/LNX 1.1.5-b20180707
    * Origin: Air Applewood, The Linux Gateway to the UK & Eire (2:250/1)
  • From Vincent Coen@2:250/1 to Richard Menedetter on Wed Mar 3 17:12:49 2021
    Hello Richard!

    Sunday February 28 2021 09:54, you wrote to me:

    Hi Vincent!

    27 Feb 2021 15:53, from Vincent Coen -> Richard Menedetter:

    @S EDITSCheckerMenu
    Put that in but made no change other than Golded pauses waiting
    for return so guess it does not like that line.

    Do you have the other options set discussed previously?

    SCheckerEnabled Auto
    SCheckerDefLang en_US de_AT
    SCheckerDicPath "/usr/local/etc/golded+/dict"

    And naturally the dictionary files in the DicPath directory.

    Set in golded.cfg as

    SCheckerEnabled Auto
    SCheckerDefLang en_GB
    SCheckerDicPath "/usr/share/hunspell"

    -!-
    -bash-4.4$ ll /usr/share/hunspell/
    total 6684
    -rw-r--r-- 1 root root 3091 Jan 14 2019 en_AU.aff
    -rw-r--r-- 1 root root 552275 Jan 14 2019 en_AU.dic
    -rw-r--r-- 1 root root 3091 Jan 14 2019 en_AU-large.aff
    -rw-r--r-- 1 root root 870871 Jan 14 2019 en_AU-large.dic
    -rw-r--r-- 1 root root 3091 Jan 14 2019 en_CA.aff
    -rw-r--r-- 1 root root 550247 Jan 14 2019 en_CA.dic
    -rw-r--r-- 1 root root 3091 Jan 14 2019 en_CA-large.aff
    -rw-r--r-- 1 root root 869104 Jan 14 2019 en_CA-large.dic
    -rw-r--r-- 1 root root 27471 Jan 14 2019 en_GB.aff
    -rw-r--r-- 1 root root 527349 Jan 14 2019 en_GB.dic
    -rw-r--r-- 1 root root 3091 Jan 14 2019 en_GB-ise.aff
    -rw-r--r-- 1 root root 550792 Jan 14 2019 en_GB-ise.dic
    -rw-r--r-- 1 root root 3091 Jan 14 2019 en_GB-ize.aff
    -rw-r--r-- 1 root root 550476 Jan 14 2019 en_GB-ize.dic
    -rw-r--r-- 1 root root 3091 Jan 14 2019 en_GB-large.aff
    -rw-r--r-- 1 root root 880535 Jan 14 2019 en_GB-large.dic
    -rw-r--r-- 1 root root 3091 Jan 14 2019 en_US.aff
    -rw-r--r-- 1 root root 548390 Jan 14 2019 en_US.dic
    -rw-r--r-- 1 root root 3091 Jan 14 2019 en_US-large.aff
    -rw-r--r-- 1 root root 863802 Jan 14 2019 en_US-large.dic
    -!-

    whereis hunspell
    hunspell: /usr/bin/hunspell /usr/share/hunspell /usr/share/man/man5/hunspell.5.xz /usr/share/man/man3/hunspell.3.xz /usr/share/man/man1/hunspell.1.xz

    There is nothing that specifies the name of the spell check program though as far as I can see unless it is a default.

    Vincent

    --- Mageia Linux v7.1 X64/Mbse v1.0.7.21/GoldED+/LNX 1.1.5-b20180707
    * Origin: Air Applewood, The Linux Gateway to the UK & Eire (2:250/1)
  • From Richard Menedetter@2:310/31 to Vincent Coen on Wed Mar 3 19:41:42 2021
    Hi Vincent!

    03 Mar 2021 17:12, from Vincent Coen -> Richard Menedetter:

    Set in golded.cfg as
    SCheckerEnabled Auto
    SCheckerDefLang en_GB
    SCheckerDicPath "/usr/share/hunspell"

    -bash-4.4$ ll /usr/share/hunspell/
    -rw-r--r-- 1 root root 27471 Jan 14 2019 en_GB.aff
    -rw-r--r-- 1 root root 527349 Jan 14 2019 en_GB.dic

    Looks OK to me.
    No clue why it is not working for you.

    There is nothing that specifies the name of the spell check program
    though as far as I can see unless it is a default.

    That is because golded only uses the dictionary.
    If I type typ then typ is shown in red.

    Color SChecker Error LRed on Black

    When I press the Spellcheck hotkey on typ it gives me alternatives like type ;)

    CU, Ricsi

    ... Consistency isn't always good especially if you're consistently wrong.
    --- GoldED+/LNX
    * Origin: We have captured your president. He was delicious. (2:310/31)
  • From Alan Ianson@1:153/757 to Vincent Coen on Wed Mar 3 15:01:28 2021
    Hello Vincent,

    Done that but F9 does not seem to do a lot just move the cursor back
    to beginning of the line that only hold one word miss-typed.

    I give up:(

    Don't give up.. :)

    I wonder if your goldkeys.cfg has more than one F9 and is confused about what you want F9 to do? I don't use a goldkeys.cfg here. I wonder if you move that file out of the way if it will work better for you?

    I have only these keywords in use for spell checking here, all in golded.cfg.


    ==== Begin: "vince.txt" ====
    SCheckerEnabled Auto ; check while typing
    SCheckerDefLang en_CA ; MYSPELL, CA English
    SCheckerDicPath /usr/share/hunspell
    EDITSPELLCHECK /usr/bin/hunspell @file
    COLOR SCHECKER ERROR LRed on Black
    ==== End: "vince.txt" ====

    The last line changes the colour of misspelled words and make it easier to see.

    Ttyl :-),
    Al

    --- GoldED+/LNX 1.1.5-b20180707
    * Origin: The Rusty MailBox - Penticton, BC Canada (1:153/757)
  • From Kai Richter@2:240/77 to Vincent Coen on Thu Mar 4 09:11:22 2021
    Hello Vincent!

    03 Mar 21, Alan Ianson wrote to Vincent Coen:

    wonder if you move that file out of the way if it will work better for you?

    To get rid of any other configuration you could create an independent test config for golded. Create an empty directory, cd into it, create a directory "netmail", start ged with "gedlnx -INSTALL".

    You would have to enter your usersame first, then your fidonet address, then the path to your netmail folder, which is "./netmail" because we created netmail above and the path and filename of your not existing areafile like "./areas.bbs". The -INSTALL function would create a fresh golded.cfg file in your actual directory.

    You can edit the file before the first start, because areafile is not required for a minimal config. You will have a golded.cfg like this:

    USERNAME Test
    ADDRESS 9:9/9
    AREADEF NETMAIL "Netmail" 0 Net Opus ./netmail
    #AREAFILE AreasBBS ./areas.bbs

    You can start that with

    gedlnx -C./golded.cfg

    and you will have clean minimal configuration where you could test the spellchecker configuration without any previous re-configurations.

    Regards

    Kai

    --- GoldED+/LNX 1.1.4.7
    * Origin: Monobox (2:240/77)
  • From Vincent Coen@2:250/1 to Alan Ianson on Fri Mar 5 18:29:55 2021
    Hello Alan!

    Wednesday March 03 2021 15:01, you wrote to me:

    Hello Vincent,

    Done that but F9 does not seem to do a lot just move the cursor
    back to beginning of the line that only hold one word miss-typed.

    I give up:(

    Don't give up.. :)

    I wonder if your goldkeys.cfg has more than one F9 and is confused
    about what you want F9 to do? I don't use a goldkeys.cfg here. I
    wonder if you move that file out of the way if it will work better for
    you?

    In goldkeys.cfg

    -!-
    Del EDITdelchar
    ^Del EDITdelete
    @K EDITdeleteeol
    @Y EDITdeleteeol
    ; EDITdeletesol
    BackSpace EDITdelleft
    @D EDITdelline
    ^Y EDITdelline
    ^BackSpace EDITdelltword
    ^F5 EDITdelltword
    ^T EDITdelrtword
    ^F6 EDITdelrtword
    F9 EDITspellcheck
    -!-



    Vincent

    --- Mageia Linux v7.1 X64/Mbse v1.0.7.21/GoldED+/LNX 1.1.5-b20180707
    * Origin: Air Applewood, The Linux Gateway to the UK & Eire (2:250/1)